Equipment for assembling high pressure hoses and tubes
Hydraulic hoses
Hydralics fittings
Industrial hoses
Fittings for industrial hoses
Thermoplastic hoses
PTFE teflon hoses
Fittings for thermoplastic and PTFE hoses
Ultra-high pressure hoses
Push Lok low pressure hoses
Tube fittings
Swivel joints
Valves
Quick couplings
Stainless steel fittings
Reusable fittings
Hose protection
Hoses for the automotive industry
Automotive fittings
Drilling hoses
Hydraulic tubes
Hydraulic fracturing hoses
Plugs for fittings
Hose, tube & pipe cleaning system
Seals
Pipe fixing
Ball valves
Online partnership
Hydraulic testing equipment
Retention systems and clamps for hoses
Lubrication and dispensing equipment
Miscellaneous tools for houses
Every month, our company tests several thousand high pressure hoses (HPR). Each RVD is made in accordance with international standards and established rules, as well as specifications developed by our company. Sleeves are manufactured on state-of-the-art equipment, tested, subjected to mandatory internal cleaning with special wads and only then sent to the customer. Before sending the finished product, we can give a 100% guarantee that the sleeve is ready for installation on the equipment without additional cleaning. But after transporting the cargo by the carrier, we can no longer give the same guarantee.
Most often, during transportation, various dirt and debris gets into the high-pressure sleeve, so before installation it must be re-cleaned with a special pistol for cleaning the HPR. If this is not done, the risk of contamination of the entire hydraulic system is high. To avoid additional cleaning and prevent dirt from entering the HPR cavity, we install thermal plugs (plugs for HPR) at the ends of the pressurized hoses, which take the form of end fittings when heated with a thermophene and reliably protect the hose cavity from dirt. .
We recommend that each enterprise carrying out repair and manufacture of HPR install plugs for HPR on the finished product. There are a total of 5-6 sizes for all fitting types. The compression time for the fitting shape is 1 second. It is necessary to use a conventional construction thermophene for compressing thermal heaters for HPR.
RVD plugs replace unreliable packaging with stretch film or expensive plastic plugs, with advantages: reliable packaging and low cost. You can buy RVD plugs from our company. The warehouse in St. Petersburg and Moscow has all the sizes of plugs for RVD. Learn how to mount an HPR thermal plug to a high-pressure sleeve from our video:
