Comparative characteristics of the equipment
In the comparison tables below you can compare the main characteristics of two brands: Italian O+P and German Uniflex.
Cutting machines manufactured by OP S.r.l и Uniflex Gmbh
| Characteristics | OP | UNIFLEX | |||||||||||||
| TF1 | TF2 | TF3 | TF3 PI | TF4 | EM10 | EM3 DC | EM3 Eco | EM3 | EM2 | EM6 | EM7 | EM8 | EM105 | EM110 | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||||
| Max. Ø 6-in. sleeves | 1 1/2" | 2" | 2" | 2" | 1 1/4" | 1" | 1 1/4" | 1 1/4" | 1 1/2" | 2" | 2" | 2" | 3" | ||
| Max. Ø 4-in. sleeves | 1 1/4" | 2" | 2" | 2" | 2 1/2" | 5/8" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/2" | 2" | 2" | 2" | 2" |
| Max. external Ø (mm) | 60 | 75 | 100 | 100 | 100 | 45 | 80 | 52 | 80 | 80 | 65 | 80 | 120 | 120 | 125 |
| Air supply | нет | нет | нет | да | да | нет | нет | нет | нет | нет | да (EM6P) | да (EM7P) | да (EM8P) | да (EM8BP) | да |
| Ø blades (mm) | 250 | 250 | 400 | 400 | 400 | 160 | 250 | 200 | 275 | 275 | 300 | 350 | 400 | 520 | 520 |
| Motor power (kW) | 1.1 | 3 | 5.5 | 5.5 | 5.5 | 1.1 | 2,4 | 2,2 | 3 | 3 | 3 | 4.4 | 5 | 6.6 | 7.5 |
| Weight (kg) | 44 | 60 | 187 | 240 | 240 | 8 | 29 | 20 | 50 | 65 | 73 | 69 | 60 | 310 | 280 |
Debarking machines from O+P S.r.l and Uniflex Gmbh
| Characteristics | OP | UNIFLEX | |||||||
| SPF1 | SPF2E | SPF2 | SPF2/MS | SPF3 | SPF4 | USM2 | USM6 | USM100 | |
| Ø external stripping | 2" | 2" | 2" | 2" | 2" | 3" | 2" | 2" | 2" |
| Ø internal stripping | 2" | 2" | 2" | 2" | 2" | 3" | 2" | 2" | 2" |
| External/internal stripping at the same time | no | no | no | no | no | yes | no | no | yes |
| Air supply | no | no | yes | yes | yes | yes | no | no | no |
| Engine power(kW) | no | 0,75 | 0,75 | 0,75 | 0,75 | 0,75 | no | 0,37 | 1,8 |
| Weight (kg) | 7,5 | 44 | 65 | 65 | 126 | 223 | 16 | 61 | 70 |
Manual crimping machines from O+P S.r.l, Uniflex Gmbh and Finn-Power
| Characteristics | UNIFLEX | OP | Finn-Power | Verso | |||||
| S1M | S2M | H46 | H54PM | P16HP | P20HP | C12 | C25 | С32 | |
| Pressing force (kN/t) |
750/ 75 |
900/ 90 |
1000/ 100 |
1300/ 130 |
955/ 95,5 |
1370/ 137 |
680/ 68 |
1000/ 100 |
1300/ 130 |
| Max. sleeve diameter | 1” | 1 ¼” | 1” | 1 ¼” | 1” | 1 ¼” | ½” | 1” | 1 ½” |
| Pressing corner fittings | ½” | 1” | ⅜” | 1 ¼” | ⅜” | 1 ¼” | ½” | 1” | 1 ½” |
| Max. pressing area (mm) | 52 | 63 | 46 | 54 | 45 | 61 | н/д | 52 | 64 |
| Opening diameter (mm) | Ø+10 | Ø+22 | Ø+20 | Ø+35 | Ø+20 | Ø+25 | н/д | Ø+24,6 | н/д |
| Opening without clamps (mm) | 52 | 77 | 65 | 81 | н/д | н/д | 67 | 80 | 80 |
| Amount of oil in the system (l) | 0,32 | 0,75 | 0,7 | н/д | 0.75 | 0.75 | н/д | н/д | н/д |
| Dimensions (L/W/H) |
230х 180х 160 |
500х 420х 440 |
300х 390х 280 |
570х 640х 380 |
331х 386х 271 |
487х 441х 389 |
600x 400x 500 |
600x 400x 500 |
790x 600x 900 |
| Вес (кг) | 15 | 32 | 32 | 87 | 26 | 66 | 23 | 39 | 65 |