Recommendations and comparisons
In this list you will find all optional features of the O+P pressurizing equipment.
The table shows the VFD numbers corresponding to Hyundai vehicles.
Recommended Ultra Clean projectile size chart for pipes.
Recommended Ultra Clean shell size chart for high-pressure hoses.
The table shows the VOLVO hoses numbers corresponding to the VOLVO equipment
The table shows the hoses numbers corresponding to the CAT technique
The table shows the numbers of hoses corresponding to JCB machines
The table shows the numbers of hoses corresponding to BELAZ vehicles
DIN - from German Deutsches Institut für Normung - German Institute for Standardization. It was founded in December 1917 in Germany
Recommendations of the Italian Association for the selection and storage of hoses
Comparison of technical parameters of machine tools from different manufacturers
Tables with comparative characteristics of cutting, debarking and crimping machines
Overview of storage times for high-pressure hoses according to the standard
Information letter from CAST S.p.A. on the interchangeability of fittings of different series
These illustrative diagrams will help you with the proper installation of the corner fittings
Conversion tables of the different units of measurement used on our website
Step-by-step instructions for cleaning and lubrication of H-series machines, with illustrations
High pressure hose standards
Before selecting a supplier and the products it produces, we check that the products comply with Russian GOST standards. Any product supplied by our company complies with Russian standards.High-pressure hoses are manufactured according to European EN or American SAE standards. The regulations for the production of high-pressure hoses in Europe are relatively recent. Since mid-1997, the European Union has introduced standards for the manufacture of metal coiled and braided high-pressure hoses. Hose standards EN 853, EN 857, EN 856 establish norms for the manufacture of rubber hoses intended for transportation of hydraulic fluids according to ISO 6743-4, which manufacturers must comply with. These standards are comparable to Russian standards and either meet or exceed them.
High pressure hose standards
EN 853 standard - this standard is used to produce braided high-pressure hoses 1SN, 2SN, 1ST, 2ST, EN 853 standard corresponds to GOST 6286-73 standard.EN 857 standard - regulates the production of high-pressure hoses with increased flexibility, hoses with index 1SC, 2SC. This type has been specially developed for cranes and forklifts.
EN 856 is a standard that regulates the production of hoses with metal coils. It is used to produce 4SH, 4SP hoses, which comply with the Russian standard GOST 25452-90.
Also in our assortment you can find hoses manufactured according to the American SAE standard.
SAE 100 standard R13, R15 - this standard regulates the production of heavy hoses with six metal coils.
SAE 100 R7, R8 is the American standard for thermoplastic hoses.